Further Details

From transporting a dishwasher into your residence to connecting the water connections, installing a dish washer can occupy to five hours. If you do not have the right tools, it can take also much longer. To make your life easier and also to stay clear of mounting a dishwashing machine incorrectly, we recommend employing a specialist plumber. A plumber will certainly have the right tools on hand and also can mount your brand-new dishwashing machine in under 2 hrs. Maintain reading to learn why you need to employ a plumber if you're not rather persuaded yet.

 

A Plumber Can Evaluate the Supply Lines

A supply line, especially a dishwasher adapter, links the dishwasher to a water source. A plumber can make certain that the line is suitable with both your dishwashing machine and water resource if you buy a new supply line. A professional plumber can examine it to guarantee that it's in good condition and does not have any leaks if you choose to make use of an existing supply line.

 

An Improper Installation Can Nullify the Dish washer's Service warranty

Before setting up a dishwashing machine on your own, you ought to review the service warranty thoroughly. Unless you are handy and have experience installing dish washers, you ought to hire a plumber so you do not risk your warranty.

 

Setting Up a Dishwasher Calls For a Selection of Devices

You may require to make a trip to Lowe's or House Depot if you do not have a range of tools on hand. To install a dish washer, you require the complying with tools: pliers, an adjustable wrench, a set of screwdrivers, a tube cutter, and also opening saws. You will certainly likewise need cleansing products such as a shallow container and also sponge. If you do not have any one of these products, the price to acquire them can accumulate promptly.

 

Not Mounting Your Dish Washer Appropriately Can Cause a Mountain of Issues

Not only can setting up a dishwasher correctly void your warranty, however it can additionally develop a mess. If you inaccurately mount your dish washer to the garbage disposal, you might notice poignant smells or have deposit on your dishes.

 

A Plumber Can Finish the Work Affordably and Promptly

You don't intend to obtain stuck washing your dishes by hand. A plumber can mount your dishwasher in one to 2 hours. Additionally, the typical plumber won't bill greater than a number of hundred bucks to install your dishwasher. Why risk your guarantee and potentially have to get a new dish washer? Take the secure and also very easy course by hiring a plumber.
From transporting a dishwasher into your home to connecting the water connections, installing a dishwashing machine can take up to 5 hrs. To make your life less complicated and to stay clear of setting up a dishwashing machine improperly, we recommend working with an expert plumber. A plumber will certainly have the right tools on hand as well as can mount your new dishwashing machine in under 2 hrs. A supply line, specifically a dish washer adapter, attaches the dishwasher to a water source. Unless you are useful and have experience mounting dishwashers, you should hire a plumber so you don't risk your service warranty.

 

How To Install A Dishwasher

 

Installing A Dishwasher Yourself

 

Just like other home appliances, a dishwasher helps to make chores less time-consuming and free of hassle. Most modern kitchens have a dishwasher or a cabinet space for dishwasher installation built into them. An older kitchen with no dishwasher or cabinet space for one might require a little reconstruction to accommodate dishwasher installation.

 

Installing a dishwasher requires basic knowledge of plumbing and electrical wiring. This article contains the steps involved in dishwasher installation, dishwasher installation tips, things to consider when installing a dishwasher in a kitchen that previously had no dishwasher in it, and tips for maintaining a dishwasher.

 

Steps Involved In Dishwasher Installation

 

Step One: Gather the Necessary Supplies

 

Gather all the required items and keep them near the installation site for easy reach. The materials and tools you will require include the following:

 

• A screwdriver


• • A hose clamp


• • Duct tape (optional)


• • A brass fitting


• • Teflon tape


• • A pair of pliers


• • An adjustable wrench


• • A drill


• • Braided steel water line


• • A pair of rubber hand gloves (optional)


• • Wire nuts

 

Step Two: Take Safety Measures

 

First, turn off the power socket and unplug the power cord if it is a plug-in dishwasher. Then, proceed to turn off the circuit breaker. Next, turn off the hot water shut-off valve under the kitchen sink and run the tap to ensure the water supply is shut off. Protect your kitchen floor close to the installation area with an old rug or a piece of drop cloth.

 

Step Three: Remove the Old Dishwasher

 

This step only applies if your kitchen has an old dishwasher that you want to replace. Remove the cabinet door to gain complete access to the old dishwasher. Next, remove the cover of the access panel located at the bottom front side of the dishwasher. Locate the junction box inside the access panel.

 

Now, unscrew the terminal screws holding the wires in place at the junction box. Then, remove and tuck the wires out of the way with duct tape. Locate the dishwasher water inlet tube, undo the brass fitting and disconnect the water supply pipe from it. Put the disconnected end of the water supply line pipe into a bucket or bowl to collect any water remaining in it.

 

Reach down beneath the sink to undo the drain hose. Loosen, then clamp and disconnect the drain hose of the dishwasher from the tailpiece of the sink. Next, put the disconnected end of the drain hose into a bucket to collect the water and debris.

 

With all the connections out of place, remove the screws holding the dishwasher in place with a screwdriver, gently pull the dishwasher out from the cabinet and set it aside. You can use a piece of cloth or towel to clean up the mess made or any water spillage on the floor. Also, clean the cabinet where the old dishwasher was before installing a new one.

 

Skip this step if you are having a dishwasher installed for the first time in your kitchen.

 

Step Four: Install the New Dishwasher

 

Connect the Water Supply

 

Wrap Teflon tape on the tip of the water inlet pipe located at the bottom of the dishwasher. Screw on the 90 degrees brass fitting to the taped inlet pipe and tighten it with an adjustable wrench. Most dishwasher units do not include a brass fitting, but they are available at hardware stores.

 

Once you have the fitting, connect the new water supply line to the elbow of the brass fitting. Pass the other end of the waterline through one of the cabinet holes and place it on the floor beneath the kitchen sink.

 

Attach the Drain Line

 

Locate the dishwasher drain standout pipe, connect the drain line to the dishwasher, and secure the connection with a hose clamp. Pass the other end of the drain line through the cabinet hole and place it towards the sink drain tailpiece

 

Slide the Dishwasher into Place

 

Attach the adjustable legs to the front of the dishwasher. Carefully slide the dishwasher under the countertop into the cabinet. Stop halfway and ensure everything is in a good position before sliding it in completely. Finish hooking up the water line by connecting the other end to the dual shut-off valve located under the kitchen sink.

 

Proceed to connect the drain hose through an air gap to your garbage disposer, if you have any, or to the drain tailpiece of your sink. If you do not have an air gap, make a high loop with the drain hose before connecting it to the garbage disposal or the sink drain tailpiece.

https://www.movementplumbing.com/blog/how-to-install-a-dishwasher

Book An Estimate Now